• Login
社交账号登录

EMF829

This meter is designed as wide frequency to supervise high frequency transmission of range from 50MHz to 3.5GHz.

Detail

This meter is designed as wide frequency to supervise high frequency transmission of range from 50MHz to 3.5GHz. It has the non-directional measurement feature and high sensitivity. It can be used to measure electromagnetic field intense of the transverse electromagnetic wave cell and Absorber rooms.


Specifications:

Measurement method:Digital, triaxial measurement

Directional characteristic:Isotropic, triaxial

Display resolution:0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²

Display type:LCD 4 digits

Audible warning: buzzer

Measurement units:mV/m, V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²

Measurement display value:Instantaneous measured value, maximum value

or average value or maximum average value

Measurement alarm function:Adjustable threshold with ON/OFF

Measurement calibration factor CAL:Adjustable

Manual data memory and read storage:70 sets (only recall by meter)

Sensor type:Electric field (E)

Frequency range:50MHz to 3.5 GHz 

Measurement range:

Continuous(CW)signal(f>50MHz): 20mV/m to 108.0V/m;

                              53uA/m to 286.4mA/m;

                              1uW/m² to 30.93W/m²;

                              0uW/cm² to 3.093mW/cm²

Dynamic range: about 65dB

Absolute error(below 1V/m and 50MHz):± 1.0dB(for1.93GHz)


Frequency response:

Taking into account the sensor CAL factor:

± 3.0dB (50MHz~800MHz) ;

±2.0dB(800MHz ~2.9GHz) ;

± 3.0dB (2.9GHz~ 3.5GHz) ;


Isotropy deviation: about ±1.0dB (f>50 MHz)

Overload limit:4.2W/m2 (40 V/m)

Temperature response(0 to 50 ℃) :± 0.2dB